Viking HID-2 Especificaciones descargar pdf (Pagina 5)

B. Quick Programming Features

Privacy Number (factory disabled) .......................................................................................

Entry phone 1 keyless entry codes (factory disabled) ...........................................................

* Entry phone 1 one time use keyless entry codes (factory disabled) ...................................

Entry phone 2 keyless entry codes (factory disabled) ...........................................................

* Entry phone 2 one time use keyless entry codes (factory disabled) ...................................

Entry phone 3 keyless entry codes (factory disabled) ...........................................................

* Entry phone 3 one time use keyless entry codes (factory disabled) ...................................

Entry phone 4 keyless entry codes (factory disabled) ...........................................................

* Entry phone 4 one time use keyless entry codes (factory disabled) ...................................

Master keyless entry codes (factory disabled) ......................................................................

* Master one time use keyless entry codes (factory disabled) ..............................................

Doorstrike 1 activation time (.5 - 99 secs, factory set to 00 = .5 secs) ...................................

Doorstrike 2 activation time (.5 - 99 secs, factory set to 00 = .5 secs) ...................................

Doorstrike 3 activation time (.5 - 99 secs, factory set to 00 = .5 secs) ...................................

Doorstrike 4 activation time (.5 - 99 secs, factory set to 00 = .5 secs) ...................................

** Auxiliary Contacts:

Auxiliary contact timing

(.5 - 99 secs, factory set to 00 = .5 secs, DIP switch 1 off) .................

1. Entry phone triggered timed activation (factory setting, DIP switch 1 off) ...................

2. Entry phone triggered continuous activation ..............................................................

3. Entry phone triggered ring cadence activation ...........................................................

4. Auxiliary input triggered timed activation ....................................................................

Maximum entry phone ring count (1 - 99 rings, factory set to 5 rings) ..................................

Enable entry phone ringing (factory setting) ........................................................................

*** Disable entry phone ringing ............................................................................................

Security code (factory set 845464) ......................................................................................

Enable entry phone Caller ID (factory setting) .....................................................................

Disable entry phone Caller ID ..............................................................................................

Entry phone calls give custom double ring cadence (factory setting) ...................................

Entry phone calls give standard ring cadence ......................................................................

Dial “9” to access an outside line ..........................................................................................

Instant outside line access (factory setting, for use with private dial tone) ............................

Enable doorstrike latching commands (factory setting) ........................................................

Disable doorstrike latching commands .................................................................................

Enable entry phone identifier beeps (factory setting) ..........................................................

Disable entry phone identifier beeps ....................................................................................

Reset all programming to factory default settings ................................................................

0-6 digits (0-9)

4-6 digits (0-9)

2 digits (00-99)

2 digits (00-99) .....

1 ...........................

2 ...........................

3 ...........................

4 ...........................

2 digits (01-99)

6 digits (0-9)

1

2

3

4

5

6

7

8

9

0

###

#00

#11 - #16

#11 - #16

#21 - #26

#21 - #26

#31 - #36

#31 - #36

#41 - #46

#41 - #46

#51 - #56

#51 - #56

#19

#29

#39

#49

#59

#60

#61

#62

#47

Enter Digits

3. Accessing the Programming Mode Remotely

Step 1. Call into the C-2000A from a Touch Tone phone. Note: Call in from another line to avoid C.O. busy signals,etc.

Step 2. Answer the call from any house phone (device) connected to terminals 4 & 5, LINE OUT TO PHONES.

Step 3. From either phone enter # followed by the six digit security code (factory set to 845464, see Programming section C).

Step 4. A double beep will indicate that you have accessed the programming mode.

Step 5. You can now Touch Tone program the features listed in section B below.

Note: Programming from a cell-phone may not be suitable in areas with weak coverage.

+ ......

- then -

Memory

Location

* Note: A keyless entry code can be programmed for EITHER an unlimited number of uses or one time use, NOT both. There can

be a maximum of 6 keyless entry codes and/or one time use keyless entry codes per entrance.

** Note: Auxiliary contact programming is only to be used if the C-2000A is in the Auxiliary Contact Mode (DIP switch 1 OFF),

see DIP Switch Programming section D.

*** Note: Only entry phone call waiting Caller ID will function in this mode, standard entry phone Caller ID will not.

C. Security Code

This six digit number can be used to access the programming mode. The security code has been factory set to 845464

(V-I-K-I-N-G). It is recommended that you change the security code to a personal 6 digit number. To change the secu-

rity code, access programming (see Programming section A). Enter six digits 0-9 followed by #47. If you have forgot-

ten your security code, follow the steps in Programming section A, 2. Accessing the Programming Mode Locally

(Security Code Bypass Mode). Note: The security code must be six digits in length and can NOT contain a



or #.

1 2 3 4 5 6 7 8

Comentarios a estos manuales

Sin comentarios

Viking HID-2 Especificaciones Pagina 5

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad Viking HID-2