Viking ES-3 Especificaciones Pagina 7
- Pagina / 8
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
125KHz Proximity Carder with Built-In Keypad
The model PRX-2 is designed to be mounted directly to standard single-gang wall box, and integrates
both a 125KHz proximity card reader and keypad into a single-unit making it ideal for applications
requiring an access credential and/or personal identification number (PIN).
The proximity card reader and keypad of the PRX-2 both transmit data in 26-Bit Wiegand format, mak-
ing it compatible with any of the Wiegand equipped Viking entry controllers. The keypad is based upon
cutting-edge, non-mechanical, capacitive technology, which, unlike membrane keypads, includes no
moving parts prone to early failure. Advanced keypad enhancements include fully potted circuit board
(EWP), keys with blue LED backlighting, raised key outlines and pip on the 5-key.
The PRX-2 delivers non-contact read ranges up to 6 inches (152 mm), and operates from 5 to 14 VDC.
To allow both indoor and outdoor operation the electronics are sealed in tamper resistant epoxy pot-
ting. Concealing the mounting hardware, the PRX-2 ships with both Black and Ash (Off-White) covers
standard. See DOD# 219 for more information.
Due to the dynamic nature of the product design, the information contained in this document is subject to change without notice. Viking Electronics, and its affiliates and/or subsidiaries
assume no responsibility for errors and omissions contained in this information. Revisions of this document or new editions of it may be issued to incorporate such changes.
DOD# 195
ZF301720 Rev C
Printed in the U.S.A.
P
P
r
r
o
o
d
d
u
u
c
c
t
t
S
S
u
u
p
p
p
p
o
o
r
r
t
t
L
L
i
i
n
n
e
e
.
.
.
.
.
.
7
7
1
1
5
5
.
.
3
3
8
8
6
6
.
.
8
8
6
6
6
6
6
6
F
F
a
a
x
x
B
B
a
a
c
c
k
k
L
L
i
i
n
n
e
e
.
.
.
.
.
.
7
7
1
1
5
5
.
.
3
3
8
8
6
6
.
.
4
4
3
3
4
4
5
5
125KHz Proximity Card Reader
The model PRX-1 is a 125KHz proximity card reader and is designed to be mounted directly to a metal door
or window frame (mullions), making it ideal for applications requiring an access credential. The proximity card
reader transmits data in 26-Bit Wiegand format, making it compatible with any of the Wiegand equipped Viking
entry controllers.
The PRX-1 delivers non-contact read ranges up to 6 inches (152 mm), and operates from 5 to 14 VDC.
Physical size is a compact 3.2 x 1.7 x 0.70 inches (80 x 43 x 17 mm). Mounting is simplified with horizontal and
vertical mounting slots, which allow the reader to be conveniently adjusted and leveled. To allow both indoor
and outdoor operation the electronics are sealed in tamper resistant epoxy potting. Concealing the mounting
hardware, the PRX-1 ships with both Black and Ash (Off-White) covers standard. See DOD# 221 for more info.
26-Bit Wiegand Keypad for Entry Systems
The PRX-4 Keypad with Wiegand output allows keyless entry for select Viking apartment or office entry systems.
The PRX-4 Keypad features standard 26-bit Wiegand interfacing, a metal enclosure with potted electronics and a
pigtail connection for indoor or outdoor applications.
The Keypad interfaces with the AES-2000 Accessible Entry System. Up to 32 entry points with PRX-4 Keypads
may be added to the AES-2000 by adding ES-3 Controllers.
Alternatively, the PRX-4 can be used with the ES-1 Stand Alone Door Entry Controller, and the C-4000 Four Door
Entry Controller.
The PRX-4 is equipped with Enhanced Weather Protection (EWP) for outdoor installations where the unit is
exposed to precipitation or condensation. The PRX-4 features a foam rubber gasket, sealed connections, as well
as an epoxy potted circuit board. For more information, see DOD# 199.
Medium Range 125KHz Proximity Card Reader
The model PRX-3 is a high performance medium range 125KHz proximity card reader.
The PRX-3’s compact size yet long read range of up to 16 inches* make it ideal for park-
ing control, gate access, turnstiles, etc. It is designed to be mounted directly to a wall,
post, single gang electrical box or use an optional mounting kit (see models below) for
attaching it to a gooseneck pedestal. Mounting is simplified with horizontal and vertical
mounting slots, which allow the reader to be conveniently adjusted and leveled. To
increase vandal resistance the chassis is a single piece design with the mounting screws
concealed behind a UV stable label.
The proximity card reader transmits data in 26-Bit Wiegand format, making it compatible
with any of the Wiegand equipped Viking entry controllers. The PRX-3 is equipped with
Enhanced Weather Protection (EWP) for outdoor installations where the unit is exposed to precipitation or
condensation. With its sealed connections and fully potted electronics the PRX-3 is designed to meet an
IP66 Ingress Protection Rating. For more information see DOD# 228.
7
Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad Viking ES-3
Los Sistemas De Control De Acceso De Seguridad Viking Emergency Phones Manual de usuario
(4 paginas)
(4 paginas)
Los Sistemas De Control De Acceso De Seguridad Viking Emergency Phones Especificaciones
(12 paginas)
(12 paginas)
© 2020, manymanuals.es. Todos los derechos reservados | 0.094 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales