Viking BLK-3-EWP Manual descargar pdf (Pagina 3)

Installation

* Gel-Filled Butt

Connectors (included)

*** SL-2/SL-2-EWP

Blue Strobe Light

Foam

Gasket

Strobe

Mounting Ring

1/2" Close Nipple

Faceplate

Foam

Gasket

(2) 10-32 x 3/8" self

tapping screws

(2) 6-32 x 3/4"

screws

** Nipple

1/2" x close

(2) Knockout

Plugs

Control

Module

(2) 7/8" Nylon

spacers

Red

Green Green

Black Black

Red

Internal View of the

Weatherproof Single

Gang Box (included)

A. Installing the Strobe Light Using the Included Weatherproof Box

* Note: The gel-filled (water tight) butt connectors are designed for insulation displacement. Do not strip wires

prior to terminating.

** Important: First fully tighten the nipple into the faceplate. Next add the (2) nylon spacers, then fasten the strobe

mounting ring.

*** Note: For outdoor applications, orient the blue strobe light with the screws at the top and bottom. Use a bead

of silicone to fill any gaps or spaces to prevent water from entering the strobe light.

The BLK-4 Strobe Light Kit may be

mounted without using the included

weatherproof box. To mount the

strobe light from the front, use the

diagram shown to the right.

RED

GREEN

BLAC

SL-2/SL-2-EWP

Strobe Light

(included)

To BLK-4

Control

Module

(included)

2.75”

(2) #8-32 x 2 1/2 Phillips

Head Self Tapping Screws (included)

Wall, post, etc.

C. Rear Mounting Without Weatherproof Box

To mount the strobe light from the rear,

use the diagram shown to the right.

B. Front Mounting Without Weatherproof Box

(2) #10-32 x 5/8

Phillips Head Self

Tapping Screws

(included)

SL-2/SL-2-EWP

Strobe Light

(included)

To BLK-4 Control

Module (included)

RED

GREEN

BLACK

1 2 3 4 5 6 7 8

Comentarios a estos manuales

Sin comentarios

Viking BLK-3-EWP Manual Pagina 3

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad Viking BLK-3-EWP