Viking K-1700-3 Manual de usuario descargar pdf (Pagina 3)

When a visitor presses the call button (comes off hook), the entry phone will ring

down to the house phones and “Caller ID” information is sent. If a house phone is on

a C.O. call, call waiting tones and “Call Waiting ID” information is sent. A Touch Tone

“#” from the house phone will put the C.O. call on hold and the C-2000 will connect

to the entry phone and beep its location number. Enter Touch Tones “

44” to momen-

tarily activate that relay and return to the C.O. call or enter “#” to just return to the

C.O. call. A 1/2 second buzz will indicate when a relay has been activated.

D. Privacy Number

The “Privacy Number” is factory disabled so an entry phone off-hook will automatically ring the house phones. If a

“Privacy Number” is programmed, the visitor must Touch Tone dial the number to be able to call into the house. The

“Privacy Number” may be from 1 to 6 digits and is stored in location “#00”. To disable the “Privacy Number,” clear the

number’s memory location by entering “#00” without any previous digits.

E. Entry Codes

Each entry phone may have its own entry code for Touch Tone keyless entry. The entry codes may be from 1 to 6 dig-

its and are stored in locations “#11” through “#14” for entry phones 1 through 4 respectively. A master entry code can

be used at any entry phone and is stored in location “#50”. To clear any entry codes, simply enter just the location num-

ber (ie. “#11”) without any previous digits.

F. Relay Timers

A double pole double throw relay is available for each entry phone, and each may

be programmed with its own activation time, programmed in seconds. Each time

must be 2 digits (Example: 00 = 1/2 sec.) and is stored in locations “#21” through

“#24” for relays 1 through 4 respectively. The auxiliary contacts relay activation

time is stored in location “#30”. All activation times are factory set to 00 (1/2 sec.)

Note: A short buzz will indicate when a relay has been activated.

G. Caller ID

The C-2000 is factory set to send “Caller ID” and “Call Waiting ID” information from the entry phones. If “Caller ID” is

not required, enter “

42” while in programming to disable the C-2000 from sending Caller ID data to the house phones.

Enter “41” to enable Caller ID data.

H. Ring Cadence

Entry phone calls are factory set to ring the house phones in a standard ring cadence (2 seconds on/4 seconds off), “4

4”. The C-2000 can be programmed to give a double ring for entry phone calls (.7 seconds on/.3 seconds off/.7 sec-

onds on/4 seconds off), enter “43” when in programming.

I. Dial Tone

1. C.O. Dial Tone (Factory Default)

To program the C-2000 for C.O. dial tone, enter “45” while programming. To gain access to C.O. dial tone, dial a

Touch Tone “9”.

2. Private Dial Tone

To program the C-2000 for private dial tone, enter “

46” while programming. House phones will instantly have dial

tone on an off-hook.

J. Maximum Ring Count

The number of times an entry phone call will ring the house phones can be limited in programming. The programma-

ble maximum ring count must be 2 digits and is stored in location “#40”. The maximum ring count is programmable

from 1 - 99 and factory set to (05) 5 rings.

A. Visitors

Relays

Entry

Phones

Memory

Position

#21

#22

#23

#24

Entry

Phone

Caller ID and

Call Waiting ID

“Entry Phone 1”

“Entry Phone 2”

“Entry Phone 3”

“Entry Phone 4”

If you require the door strike to remain on continuously (ie: a truck delivery), enter Touch Tones “41” to continuously

activate that relay and return to the C.O. call. A long buzz will indicate the door strike relay is latched on. When the

visitor calls in again (ie: they are finished unloading the truck), enter Touch Tones “40” to deactivate the relay. A short

buzz will indicate the door strike relay is off.

B. Monitoring

Tenants may dial out to an entry phone that supports auto-answering capability by dialing “#1”, “#2”, “#3” or “#4” to call

entry phones 1-4 respectively. All recent Viking Handsfree Phones are equipped with an Auto-Answer feature.

1 2 3 4

Comentarios a estos manuales

Sin comentarios

Viking K-1700-3 Manual de usuario Pagina 3

Comentarios a estos manuales