Viking FFI7240WL Manual de instalación

InstallationGuide7 SERIESIntegrated All RefrigeratorIntegrated All FreezerVFI7180 / CVFI7180/ VFI7240 / CVFI7240 FFI7180 / CFFI7180 / FFI7240 / CFFI

10 Anti-Tip DimensionsWARNING TIP OVER HAZARD Appliance is top heavy and tips easily when not completely installed. To avoid a hazard due to insta

11 General Information Area RequirementsVerify the following:• Unit can  t into residence and can be moved around corners and through doorways.

12 General Information Water Supply Requirements (con't)• Connect 1/4” (6 mm)  exible copper tubing to household plumbing in compliance wit

13 Moving Unit Remove shipping brackets from skid by removing four bolts (two on each side) with a 1/2” (1.3 cm) deep-well socket wench and a pair of

14Optional Custom Front Panels - DimensionsNote: Overlay panel must be dry, solid, straight one-piece panels. The use of multiple panel pieces to achi

15Optional Custom Front Panels - InstallIn order to access the mounting holes, unsnap panel trim on both sides of door.Panel trimMounting Screw locati

16Water Line InstallationEnsure you have approximately 6 ft. (1.8 m) of 1/4" (6 mm) copper tubing available at the right rear side of the refri

17With the refrigerator in line with the cutout, but outside of the cabinetry, insert the copper tubing through the indicated hole.Push the copper tu

18Leveling UnitOnce the unit is in position, height adjustment can be made from the front. Remove acess panel just below the water  lter. Using a 5/

19Flush Mount Side TrimAfter the unit has been placed in the cutout, leveled and all connections completed, the unit will need to be fastened to the c

2Table of ContentsWarnings and Important Information ________________________________________________________________________________ 3 Cutout Dimensi

20 Door Stop AdjustmentYour refrigerator is factory set at a 90o degree opening. The 90 degree door stop opening is shown in the illustration below w

21 Water Filter System Speci cation and Performance Data Sheet ContaminantReduction Average In uent NSF Speci ed Chal-lenge Concentration A

22 Performance Checklist —Verify cabinet size. — Verify electrical supply and water supply (if applicable). — Install anti-tip device(s) and v

23Service & Registration If service is required, call your authorized service agency. Have the following information readily available.• Model num

Viking Range, LLC111 Front StreetGreenwood, Mississippi 38930 USA(662) 455-1200For product information,call 1-888-(845-4641)or visit our web site at

3IMPORTANT – Please Read and Follow! • Make sure that incoming voltage is the same as unit rating. An electric rating plate specifying voltage, fr

4WARNING TIP OVER HAZARD Appliance is top heavy and tips easily when not completely installed. Keep doors closed until appliance is completely inst

5 Cutout Dimensions Can be located on either side84”(213.4 cm) min.opening height85-3/16”(216.3cm) max.opening height*Refer to Specficationchart fo

6Speci cations (VRI/FRI/MVRI)Integrated All RefrigeratorDescription VRI MVRI 24" 24"Overall width 24" (61.0 cm) 24" (61.0 cm) Ove

7Speci cations ( VFI/FFI/MVFI)Integrated All Freezer W/Custom PanelDescription FFI 18" 24"Overall width 18" (45.7 cm) 24" (61.0

8 Dimensions (VRI/FRI/MVRI) Model Dimension A Dimension B*VRIVFI27-11/16" (70.3 cm) 24-3/4" (62.9 cm)FRI/FFIN/A 24" (61.0 cm)MVRI/MVFI

9 Door Swing / Tipping Radius1050900AB18" 24"A 19-1/16" (48.4 cm) 25-3/16" (64.0 cm)B 20-1/16" (51.0 cm) 26-1/16" (66.2