Viking FDFB5303L Manual de instalación

Busca en linea o descarga Manual de instalación para Neveras Viking FDFB5303L. Viking FDFB5303L Installation Instructions (5 MB) Manual de usuario

  • Descarga
  • Añadir a mis manuales
  • Imprimir

Indice de contenidos

Pagina 1 - Installation Guide

Installation Guide5 SeriesCustom PanelAll Refrigerator/All Freezer

Pagina 2 - Table of Contents

9”(22.9 cm)73-3/8”(186.4 cm)82-7/8”(210.5 cm) min.anti-tip board &opening height84-1/16”(213.5 cm) max.anti-tip board &opening height36”(91.5

Pagina 3 - Please Read and Follow

One 2”x 4” mounting board1-1/2” (3.8 cm) x 3-1/2” (8.9 cm)Note: If unit is installed deeper than 24” (61.0 cm), then shim behind the mounting boards b

Pagina 4 - Please Read and Follow!

23-3/16”(58.9 cm)24-3/4”(62.9 cm)Measurement varies(locally supplied hardware)30”(76.2 cm)29”(73.7 cm)75-15/16”(192.9 cm)3-1/2”(8.9 cm)30”(76.2 cm)29”

Pagina 5 - TIP OVER HAZARD

75-15/16”(192.9 cm)3-1/2”(8.9 cm)30”(76.2 cm)29”(73.7 cm)29-1/2”(74.9 cm)1”(2.54 cm)between units35”(88.9 cm)36”(91.5 cm)Measurement varies(locally su

Pagina 6

75-15/16”(192.9 cm)3-1/2”(8.9 cm)1”(2.54 cm)between units35”(88.9 cm)36”(91.5 cm)Measurement varies(locally supplied hardware)23-3/16”(58.9 cm)24-3/4”

Pagina 7

Specifications 15Dual All Refrigerator/Freezer*Description (2) 30” Units (1) 36” & (1) 30” Unit (2) 36” UnitsOverall width 60” (152.4 cm) 66” (1

Pagina 8 - 30” All Refrigerator/Freezer

9”(22.9 cm)73-3/8”(186.4 cm)82-7/8”(210.5 cm) min.anti-tip board &opening height84-1/16”(213.5 cm) max.anti-tip board &opening height60”(152.4

Pagina 9

79-3/8”(201.6 cm) min.to bottom of anti-tip board80-1/2”(204.6 cm) max.to bottom of anti-tip boardOne 2”x 4” mounting board per unit1-1/2” (3.8 cm) x

Pagina 10 - 36” All Refrigerator/Freezer

9”(22.9 cm)73-3/8”(186.4 cm)82-7/8”(210.5 cm) min.anti-tip board &opening height84–1/16”(213.5 cm) max.anti-tip board &opening height66”(167.6

Pagina 11

79-3/8”(201.6 cm) min.to bottom of anti-tip board80-1/2”(204.6 cm) max.to bottom of anti-tip boardOne 2”x 4” mounting board per unit1-1/2” (3.8 cm) x

Pagina 12 - Dimensions

2Table of ContentsWarnings & Important Information ____________________________________________________________________3All Refrigerator/FreezerDi

Pagina 13

9”(22.9 cm)73-3/8”(186.4 cm)82-7/8”(210.5 cm) min.anti-tip board &opening height84-1/16”(213.5 cm) max.anti-tip board &opening height72”(182.9

Pagina 14

79-3/8”(201.6 cm) min.to bottom of anti-tip board80-1/2”(204.6 cm) max.to bottom of anti-tip boardOne 2”x 4” mounting board per unit1-1/2” (3.8 cm) x

Pagina 15 - Specifications

35-1/4”(89.5 cm)75-1/2”(191.8 cm)3/4”(1.9 cm)29-1/4”(74.3 cm)75-1/2”(191.8 cm)3/4”(1.9 cm)Overlay Dimensions 2230” Custom Panels36” Custom PanelsNote:

Pagina 16 - Cutout Dimensions

1/2”(1.27 cm)1-1/2”(3.81 cm)1/4” Radius(.64 cm)2-3/4”(6.98 cm)1/2”(1.27 cm)3/4”(1.90 cm)1/2”(1.27 cm)1/8”(.31 cm)1/2”(1.27 cm)1/4” Radius1/4” Radius(1

Pagina 17 - (58.4 cm)

2-1/8”(5.39 cm)3-1/8”(7.94 cm)3-5/8”(9.20 cm)1-3/8”(3.49 cm)3/8”(.95 cm)3/8” Radius3/8” Radius(.95 cm)(.95 cm)3/8” Radius(.95 cm)Reverse dimensions fo

Pagina 18

Note: This part should be located at the center of the grille. If desired, two per grille can be used by dividing the length of the grille into thirds

Pagina 19 - Anti-Tip Location

Note: This part should be located at the center of the grille. If desired, two per grille can be used by dividing the length of the grille into thirds

Pagina 20

Note: This part should be located at the center of the grille. If desired, two per grille can be used by dividing the length of the grille into thirds

Pagina 21 - (73.7 cm)

28Top ViewTop ViewDoor24”(61.0 cm)standard cabinet depth25”(63.5 cm)countertopdepth25”(63.5 cm)countertopdepth25”(63.5 cm)countertopdepthWall3/4”(1.9

Pagina 22 - 36” Custom Panels

Top ViewFlush mount cabinet doors24”(61.0 cm)standard cabinetdepth24”(61.0 cm)standard cabinetdepth24”(61.0 cm)standard cabinetdepth24-3/4”(62.9 cm)Ca

Pagina 23 - 30” Custom Grille

3IMPORTANT – Please Read and Follow• Make sure that incoming voltage is the same asunit rating. An electric rating plate specifyingvoltage, frequency,

Pagina 24 - 36” Custom Grille

3/4”(1.9 cm)End panel1”(2.5 cm)1/4”(0.6 cm)Z-Bracket21-3/4”(55.2 cm)21-3/4”(55.2 cm)24”(61.0 cm)Optional kickplate notch(Dimensions determined by cabi

Pagina 25 - Dual 30” Custom Grille

31Custom Panel General InformationCustom finishing options• All installations must allow for the refrigeratorand freezer door to open a minimum of 90˚

Pagina 26 - Optional hinge cover

32Remove handle side cabinet screws and trim with a phillips screwdriver.Remove all screws from handle side door trim. Remove two screws from top and

Pagina 27 - Dual 36” Custom Grille

517Slide custom wood panel to the hinge side, ensuring “Z” bracket engages the door bracket.8x13x2x2Reinstall handle side door trim and door trim scre

Pagina 28 - Cabinet Information

3412Remove air grille center blade.Remove two 1/4” (0.6 cm) screws with a magneticextended screwdriver at least 8” (20.3 cm) long.34Pull air grille as

Pagina 29

35Install two 1/4” (0.6 cm) screws with a magneticextended screwdriver at least 8” (20.3 cm) long.Install custom air grille center blade.78Custom Gril

Pagina 30

36General InformationArea RequirementsVerify the following:• Unit can fit into residence and can be movedaround corners and through doorways.• Floors

Pagina 31 - Custom finishing options

37General InformationWater Supply RequirementsUse only 1/4” (6 mm) copper tubing for water line.DO NOT install copper tubing in area wheretemperatures

Pagina 32

38General Information• Most of the unit’s weight is at the top. Extracare is needed when moving the unit to prevent tipping. • DO NOT remove protectiv

Pagina 33

3912Place unit in front of cutout.Pull the center grille louver up at an angle and pull out.34Using an 8” magnetic nut driver, remove the two 1/4” scr

Pagina 34

IMPORTANT – Please Read and Follow!4A GFI shall be used if required by NFPA-70 (National Electric Code), federal/state/local laws, orlocal ordinances.

Pagina 35

40Replace unit top and four side screws.Attach one 2 x 4 to wall stud (refer to dimensions pagefor exact location).If needed, depending on cabinet and

Pagina 36 - Anti-Tip Requirements

4111Pull supply tubing forward under unit.Note: DO NOT use plastic water lines.1213Flush water line by running two quarts of water into a bucket. Turn

Pagina 37 - General Information

42Verify that drain pan is installed and aligned.Align holes on both ends of louvered panels and insert screws.Using a phillips screwdriver, attach th

Pagina 38

43Replace top air grille.Using an 8” magnetic nut driver, replace the two 1/4” screws.Replace the center grille louver.Open door. The display should f

Pagina 39 - Hinge Adjustment

44Performance Checklist Verify cabinet size. Verify electrical supply and water supply (if applicable). Install anti-tip device(s) and verify unit

Pagina 40

45Verify OperationsControl Panels1. Press “Activate Controls” pad.2. Verify unit is not in Sabbath Mode.If in Sabbath Mode:A. The Sabbath Mode will di

Pagina 41 - Note: DO NOT overtighten

46Service & RegistrationIf service is required, call your dealer or authorized service agency. The name of the authorized serviceagency can be obt

Pagina 43 - Final Installation

Viking Range, LLC111 Front StreetGreenwood, Mississippi 38930 USA(662) 455-1200For product information, call 1-888-(845-4641)or visit our web site at

Pagina 44 - Performance Checklist

5ELECTRICAL SHOCKHAZARDDisconnect power or turnpower disconnect switch toOFF position before removing top grille.Failure to do so can result in death

Pagina 45 - Verify Operations

24”(61.0 cm)35”(88.9 cm)75–15/16”(192.9 cm)3–19/32”(9.1 cm))36”36”(91.5 cm)(91.5 cm)36”(91.5 cm)9–5/32”(23.3 cm)82–3/4”(210.2 cm)min.to84–1/16”(213.5

Pagina 46 - Service & Registration

7Specifications 30” All Refrigerator/FreezerDescription FDFB/CFDFB FDRB/CFDRBOverall width 30” (76.2 cm)Overall height (from bottom) 82-3/4” (210.2 cm

Pagina 47

9”(22.9 cm)73-3/8”(186.4 cm)82-7/8”(210.5 cm) min.anti-tip board &opening height84-1/16”(213.5 cm) max.anti-tip board &opening height30”(76.2

Pagina 48

One 2”x 4” mounting board1-1/2” (3.8 cm) x 3-1/2” (8.9 cm)Note: If unit is installed deeper than 24” (61.0 cm), then shim behind the mounting boards b

Comentarios a estos manuales

Sin comentarios